Laser-Schneidemaschine BALLIU CF 1500/PS

Metallbearbeitungs- und Werkzeugmaschinen / Blechbearbeitungsmaschinen

weitere Fotos anfordern

Exapro S.A.S
[ Händlerprofil ]

4 place Marc Leclerc
49400 Saumur
Frankreich

RESALE Anbieter seit 2023

Maschinenliste (4981)

Anfrage

merken

Anfrage sendenAnfragen

Eintrags-Nr.: 163521976	Anzahl: 1	Datum: 02.05.2024
Baujahr: 2005	Standort: Tschechien

Preis: [netto]	53.000 EUR
Hersteller:	Balliu
Modell:	CF 1500/PS
Maschinentyp:	Laser-Schneidemaschine
Beschreibung:	Laser-Schneidemaschine Balliu CF 1500/PS Gebrauchtmaschine Type: CF 1500 / PS Parameters: 18 mm, 1500 x 3000 mm Manufacturer: Balliu Year of production: 2005 Location: Czech Republic Description: Laser BALLIU CF 1500 / PS, 3.5 kW, year 2005, in operation under power, possible inspection, regularly serviced. It is a CO2 laser with linear motors and uses the SPAB Rofin Sinar laser resonator. Advantages of this laser source: Cheap traffic Low demands on rare gases such as Helium and Argon The machine only needs dehumidified frozen air to operate. It still has its own Donaldson freezer and therefore does not need 5.0 nitrogen for operation. Black sheets are cut with oxygen 4.0 and higher, stainless steel sheets with nitrogen 4.0 and higher. It has a resonator of 3,500 W, which means that it cuts black sheet metal up to 18 mm and stainless steel up to 8 mm. It has Siemens linear motors, so it hardly requires maintenance and does not wear out mechanically, it has no screws or combs. The cost per hour of cutting was always around CZK 800 per hour of operation. They were able to keep the machine themselves in operation, the resonator is a patented device and an authorized service was performed once a year. The resonator is after GO, the replacement of the cathode, which develops the beam, so it should last about 6 years of operation The machine is in operation, offer without transport and installation. The machine is a compact, welded frame poured with polymeric concrete, it can be transported on a jumbo height of 60 cm above the road. Installation by a manufacturers technician takes a maximum of one week. Technical parameters: Sheet format: 3000 x 1500 mm Laser power: 3500 W Control system: Simens Sinumeric 840 D Resonator power: Rofin Sinar 3,500 W It burns black sheet metal up to 18 mm and stainless steel up to 8 mm Siemens linear motors Two interchangeable pallets Machine weight: approx. 20 tons Verkäufer Angebot Nr. resale P90813101
Positionsnummer des Verkäufers:	P90813101

Diese Maschine auf Facebook

Diese Maschine als verkauft

Laser-Schneidemaschine BALLIU CF 1500/PS

Anfrageformular

aktuelle Balliu CF 1500/PS + ähnliche Balliu-Modelle

verwandte Suchbegriffe