BARMAG AIR TEXTURIZING LINES for the production of artificial grass
yarn, The supply can be split as follows:, - Texturizing machine, -
Barmag twister with 36 spindles., - SIMA Winder with 4 groups of 15
heads each, - Roblon T5000 n.4 units, - SIMA T2TR n.3 units, - Fare
Extruder, - Meromat rope making machine for the production of 4-strand
ropes up to 16 mm., - 1 monofilament extruder FARE, These machines are
used to texturize synthetic grass., less than 500 worked hours, as
new, texturizers available, each one consists of:, monofilament
texturizing unit for one yarn, with 2 electrically heated godets, each
one with separating roller, diameter: 132mm - length: 150mm, 1 heating
zone per godet, godet temperature: maximum 180 °c, temperature
tolerance on godet surface: +/- 2 °c, temperature tolerance between
godets: +/- 1.5 °c, separating rollers with ball bearings, with 1
piece texturing jet, for texturizing of various yarns, heater for
compressed air with automatic temperature and pressure control,
cooling drum with blower and air filter, diameter of cooling drum
where the textured yarn is running: 346mm, blower capacity: 2.2 kw,
large size air filter, chromium plated take-off roller with separating
roller to supply the textured yarn from the cooling drum to the
winder, precision winding with electronic gear for changing the
winding ratio several times, during winding of one bobbin for
excellent bobbin quality even with the slippery artificial grass
monofilament, fully automatic bobbin change, with magazine for up to 4
pieces of empty winding tubes, winder with decreasing bail roll
pressure and with decreasing winding tension for, winding of textured
yarn with excellent bobbin quality, winding on to cheap paper tubes
typically used in bcf yarn production, bobbin dimensions:, inner
diameter: 73mm, length of tube: 290mm =/- 0.5mm, traverse: 250mm,
outer diameter of tube: 79mm, deposit of finished bobbin on to parking
position below the winder, signal flash lamp for alarm of empty tube
magazine, switch control box with number of inverters for each
texturing position, 1 inverter for each unrolling position, total 2
pieces, 1 inverter for each heated godet, total 2 pieces, 1 inverter
for cooling drum, 1 piece, 1 inverter for take-off roller, 1 piece, 4
inverters for automatic winder, total 4 pieces, total number of
inverters per position, total 10 pieces, make of inverters: siemens,
each 2 positions consist of the following units:, 1 unrolling tower
with 2 unrolling positions, each unrolling position is yarn tension,
controlled, each unwinding position suitable for following tube
dimensions, flanged bobbins with:, tube inner diameter: 90mm, diameter
of flanges: 260mm, tube length: 310mm, traverse: 280mm
Italien
ponderano 
