Mac für Spritzguss KRAUSS MAFFEI KM 150-520 C2

Kunststoffverarbeitungsmaschinen / Spritzgießmaschinen

weitere Fotos anfordern

Exapro S.A.S
[ Händlerprofil ]

49400 Saumur
Frankreich

RESALE Anbieter seit 2023

Maschinenliste (4978)

Anfrage

merken

Anfrage sendenAnfragen

Eintrags-Nr.: 164837630	Anzahl: 1	Datum: 08.11.2024
Baujahr: 2005	Standort: Polen

Preis: [netto]	19.000 EUR
Hersteller:	Krauss Maffei
Modell:	KM 150-520 C2
Maschinentyp:	Mac für Spritzguss
Beschreibung:	Mac für Spritzguss Krauss Maffei KM 150-520 C2 Gebrauchtmaschine Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 throttle on the valve outlet. Connection size ¼” - Door protecting the ejector chamber from the service side, with the possibility of opening - Mechanical standard joint according to Euromap 18 for handling device on fixed mold clamping plate (with console for KM max. 300 C) - Ejector force increased on entry/exit from 22 kN/10 kN to 40.0 kN/28.0 kN with reduced ejector speed. - Control of the rear position of the hydraulic ejector and the ejector plate in the mold - Chromed columns of the closing unit and the injection unit - Oil cooler with increased capacity for inlet water temperature up to 31°C at 4 - 6 bar inlet water pressure at the connection points - Adjustable stagnation pressure for hard PVC processing - Hydraulic 1-fold control of the core on the movable mold clamping plate on the opposite side of the service. Connection size ½” internal thread (speed and pressure adjustable on the monitor screen). Plug layout according to Euromap 13 (Han 16 A) - 4-fold rotameter without thermometers and without solenoid valves - Hydraulic pump motor with class F insulation - Potential-free signal for HAN 3 A dye dispenser. - The start of the pressure depends on the hydraulic pressure - Additional software for continuous logging of events (Logbuch) and viewing them by scrolling the screen backwards (max. 10,000 notes) in the range of: - changes of machine setting data; - alarm reports and acknowledgments; - enabling or disabling the control with date, time and current cycle, and registering a password (standard) or a magnetic card (Pos. 89.6711); can be entered using a printer (Pos. 89.972 or Pos. 89.9721). Additional possibility of statistical analysis on the monitor with graphical presentation of alarms in semi-automatic and automatic operation of the machine. - Quality control package: process control (cycles - actual values) by specifying the tolerance range, actual value indicator, actual value memory - with the possibility of printing - Cycle time analysis package: an indicator of individual times and total cycle time for the last current cycle and any selected cycle. Graphical presentation of successive cycles or individual times running in parallel. - Recording cycle parameters in DOS format: The actual values of each cycle are stored on a separate diskette in DOS. Data analysis on an external PC in a standard program, e.g. EXCEL - Standard connector for connecting an alphanumeric keyboard AT type MF2 for free text input of additional production information on 3 sides of the screen. - TFT color monitor - Set of set and actual value curves for the following parameters: injection speed, injection pressure, pressure, stagnation pressure and number of screw revolutions - PV-regulation of the injection speed, clamping pressure, stagnation pressure and start of clamping pressure depending on the hydraulic pressure Equipment of the LR 100 robot: Robot LR 100 MANUFACTURER: KRAUSS - MAFFEI - Krauss-Maffei LR 100 linear robot load capacity 10 kg - (gripper + drives + parts) the side of storage opposite to the service axles: stroke from form (X axis) - 550 mm, servo motor vertical stroke (Y axis) with engine brake - 1200 mm, servo motor transverse stroke (Z axis) - 1500 mm, servo motor foldable axle (C axis for putting down) - 0-90°, pneumatic - torque Md = 30 Nm Position measurement with an encoder - Mechanical joint according to EUROMAP 18 - Robot cover - AC pneumatic axis consisting of: - C axis (rotation around the Z axis between the Y axis and the gripper) rotation 0 and 90 °, torque Md = 30 Nm - with A axis of rotation (rotation around the X axis between the Y axis and the gripper) 3 positions: 0 - 90° and 180° torque Md = 3 Nm. Delivery instead of pneumatic C axis, ZE R31.2501. Verkäufer Angebot Nr. resale P230831058
Positionsnummer des Verkäufers:	P230831058

Diese Maschine auf Facebook

Diese Maschine als verkauft

aktuelle Krauss Maffei KM 150-520 C2 + ähnliche Krauss Maffei-Modelle

2000	KRAUSS MAFFEI	150-1000 C1
1998	KRAUSS MAFFEI	150-700 C1	15000 EUR
1997	KRAUSS MAFFEI	KM 150-700/C1
1988	KRAUSS MAFFEI	150
1997	KRAUSS MAFFEI	KM 150-1000 C1
2011	KRAUSS MAFFEI	LRX-S 150-0956	8900 EUR
2000	KRAUSS MAFFEI	KM 150-1000 C1

Preise: verkaufte Krauss Maffei KM 150-520 C2 + ähnliche Krauss Maffei-Modelle

2003	KRAUSS MAFFEI	ELTEC 150/700/E	38000 EUR	[Nov 2011]
1991	KRAUSS MAFFEI	KM 150-900 B2	5600 EUR	[Feb 2019]
1992	KRAUSS MAFFEI	KM 150-620 B1 MC 3	12000 EUR	[Nov 2011]
2003	KRAUSS MAFFEI	KM 150- 1000 C2	11700 EUR	[Aug 2022]
1987	KRAUSS MAFFEI	KM 150/460 AB MC 3	12000 EUR	[Nov 2011]
1992	KRAUSS MAFFEI	KM 150-620 B 1	10000 EUR	[Dec 2010]
1993	KRAUSS MAFFEI	KM 150/620 B1 MC 3	14000 EUR	[Nov 2011]
1996	KRAUSS MAFFEI	C1 150	5000 GBG	[Apr 2015]

verwandte Suchbegriffe

Krauss maffei spritzgussmaschinen + Krauss maffei spritzgießmaschine + Krauss maffei doppelschneckenextruder + Krauss maffei extruder + Krauss maffei filter + Krauss maffei frequenzumrichter + Krauss maffei kunststoffspritzgiessmaschinen + Krauss maffei mehrkomponentenspritzgiessmaschinen + Krauss maffei pet preformmaschinen + Krauss maffei schnecken und weitere ...