Tracked multi-saw SCM M3 No. 4
- Italian production
- year of production 2000
- DTR
TECHNICAL SPECIFICATIONS:
track width 300 mm
cutting height 120 mm
engine power 25 kW
max. blade diameter 350 mm
max. workpiece width 1000 mm
min. workpiece length 400 mm
adjustable feed on the inverter
pneumatically adjustable ruler on the right
revolver ruler setting of 6 types
three rows of anti-recoil pawls
possibility of putting on a board - a shoe
spindle diameter 50 mm
sleeve diameter 70 mm
the sleeve is equipped with spacers
automatic central lubrication
four upper pressure shafts
spigot diameter 180 mm and 120 mm
dimensions of the machine (length / width / height) 210/175/160 cm
weight 1800 kg
Multirip saws are machines used in the wood industry mainly for
cutting piles, but not only. Machines of this type can cut boards into
smaller elements and cut lamellas. The principle of their operation is
very simple, the machine has a spindle located in a central point on
the horizontal axis, on which tools in the form of discs are
installed. Depending on the purpose, multi-rip saws can have one or
two spindles. In the latter case, the device has greater cutting
possibilities, comparing primarily the thickness of the material. An
additional advantage of machines with two shafts is the lower kerf.
Another major division of machines is the method of material feeding.
They can be separated into shaft feed and track feed. When cutting the
saw with a shaft feed, the material is moved through the upper and
lower shafts, depending on the design, they can be all or only the
lower shafts. In turn, devices with a caterpillar move the wood with
its help, and the rollers located in the body press the material
against it. The selection of the appropriate machine depends primarily
on the intended use. Consider whether only the pallet box elements or
boards made of expensive exotic wood will be cut. All of this can
influence the choice of the machine.
Polen
